 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www.fairchildsemi.com KA7630/7631 Fixed Multi-output Regulator Features * Output Currents up to 0.5A (output1 & 2) * Output Current up to 1A with External Transistor (output3) * Fixed Precision Output 1 voltage 5.1V 2% * Fixed Precision Output 2 voltage 8V 2% (KA7630) * Fixed Precision Output 2 voltage 9V 2% (KA7631) * Control Signal Generator for Output 3 voltage (12V 2%) * Reset Facility for Output Voltage1 * Output 2,3 with Disable by TTL Input * Current Limit Protection at Each Output * Thermal Shut Down Description The KA7630/KA7631 is a multi-output positive voltage regulator designed to provide fixed precision output voltages of 5.1V, 8V (7630) / 9V (7631) at current up to 0.5A and12V at current up to 1A with external PNP transistor. An internal reset circuit generates a reset pulse when the output 1 decrease below the regulated value. Output2 & 3 can be disabled by TTL input. Protection features include over voltage protection, short circuit protection and thermal shutdown. 10-SIP H/S Internal Block Diagram Vin1 1 10uA 3 Cd 100nF RESET Vsys 6 + SW Thermal Shut Down OVP Bandgap Reference Vin2 2 OVP Vin1 2.5V DEL.CAP + SCP 9 Output 1 + 50mV Vin2 10K A614 "Y" Control 10 Output3 7 + SCP + + Output 2,3 1.4V SCP 8 Output 2 5 GND 4 Disable Rev. 5.0 (c)2000 Fairchild Semiconductor International KA7630/7631 Absolute Maximum Ratings Parameter DC Input Voltage Disable Input Voltage Output Current Power Dissipation Junction Temperature Operating Temperature Symbol Vin Vc Io Pd Tj Topr Value 20 20 0.5 1.5 +150 0~+125 Unit V V A W C C Remark No Heatsink - Electrical Characteristics(KA7630) (Refer to test circuit Vin1=7.5V ,Vin2=10.5V ,Tj = +25 C, unless otherwise specified) Parameter Output Voltage 1 Symbol Vo1 Conditions Io1=10mA 7.5V Vo2 Vd1,2 Vo 1,2 Vo 1,2 Vo3 Vo3 Vo3 Trd VrL IrH STt Isc1,2 VdisH VdisL Idis Ttsd Iq Vr Vrth V V mV mV V mV mV ms V A ppm/C A V V A C mA V mA Notes: 1. To check the reset circuit ,the reset output is low to discharge the delay capacitor(=Cd). if it's less than Vo1-0.25V. And the reset output is high when the delay capacitor voltage linearly increased by the interal current source(10A) if it's more than Vo1- 0.2V. The equations of delay time is same as below. Trd = (Cd x 2.5) / 10A 2. These parameters, although guaranteed, are not 100% tested in production. 2 KA7630/7631 Electrical Characteristics(KA7631) (Refer to test circuit Vin1=7.5V ,Vin2=11.5V ,Tj = +25 C, unless otherwise specified) Parameter Output Voltage 1 Symbol Vo1 Conditions Io1=10mA 7.5V Vo2 Vd1,2 Vo 1,2 Vo 1,2 Vo3 Vo3 Vo3 Trd VrL IrH STt Isc1,2 VdisH VdisL Idis Ttsd Iq Vr Vrth V V mV mV V mV mV ms V A ppm/C A V V A C mA V mA Notes: 1. To check the reset circuit ,the reset output is low to discharge the delay capacitor(=Cd). if it's less than Vo1-0.25V. And the reset output is high when the delay capacitor voltage linearly increased by the interal current source(10A) if it's more than Vo1- 0.2V. The equations of delay time is same as below. Trd = (Cd x 2.5) / 10A 2. These parameters, although guaranteed, are not 100% tested in production. 3 KA7630/7631 Mechanical Dimensions Package Dimensions in millimeters 10-SIP H/S 3.25 0.20 0.128 0.008 #1 1.50 ) 0.059 0.50 0.10 0.020 0.004 ( 25.75 0.10 1.013 0.004 26.05 MAX 1.026 #10 1.30 ( ) 0.051 2.54 0.100 1.30 0.10 0.051 0.004 1.00 0.20 0.039 0.008 7.00 0.30 0.276 0.012 8.90 0.20 0.350 0.008 13.65 0.30 0.537 0.012 16.80 MAX 0.661 0.50 0.10 0.020 0.004 4 1.65 0.10 0.065 0.004 3.80 0.20 0.150 0.008 23.86 0.20 0.939 0.008 KA7630/7631 Ordering Information Product Number KA7630 KA7631 Package 10-SIP H/S Operating Temperature 0C to +125C 5 KA7630/7631 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR INTERNATIONAL. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 9/25/00 0.0m 001 Stock#DSxxxxxxxx 2000 Fairchild Semiconductor International 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. |
Price & Availability of KA7630
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |